JOHN DEERE強鹿冷卻水溫度燃油溫度傳感器的作用及結(jié)構特點約翰迪爾設備故障現(xiàn)象檢測方法

Remove and Install Coolant Temperature Sensor
NOTE: Your engine may be equipped with either one or two coolant temperature sensor(s) (A).
The ECU monitors coolant temperature for engine protection purposes and starting. Using the coolant temperature signal, the ECU will derate engine power as coolant temperature becomes excessive. The ECU will also adjust fuel delivery during start-up during low coolant temperature conditions.
ECT Sensor
1. Disconnect coolant temperature sensor wiring A—Coolant Temperature Sensor
connector and remove sensor from thermostat housing B—Thermostat Housing
(B).
2. Coat sensor O-ring with JDT405 High Temperature Grease and install sensor in thermostat housing. Tighten to specifications.
Specification
Coolant Temperature Sensor—
Torque ............................................................................  10 N•m (7.5 lb-ft)
3. Install sensor wiring connector.

Remove and Install Fuel Temperature Sensor (Dual Rail System)
The ECU monitors fuel temperature to determine fuel density and adjust delivery as necessary.
1. Disconnect fuel temperature sensor wiring connector and remove sensor from fuel manifold (A).
NOTE: Plug bore with clean cap plug after removal of sensor.
2. Coat sensor O-ring with JDT405 High Temperature Grease and install sensor in fuel manifold. Tighten to specifications.
Specification
Fuel Temperature Sensor-to-Fuel Manifold (Dual Rail Fuel
System)—Torque............................................................  10 N•m (7.5 lb-ft)
3.  Install sensor wiring connector.

Remove and Install Fuel Temperature Sensor (Single Rail System)
The ECU monitors fuel temperature to determine fuel density and adjust delivery as necessary.
1. Disconnect fuel temperature sensor wiring connector and remove sensor from fuel filter housing.
NOTE: Plug bore with clean cap plug after removal of sensor.
2. Coat sensor O-ring with JDT405 High Temperature Fuel Temperature Sensor
Grease and install sensor in fuel filter housing. Tighten to specifications.
Specification
Fuel Temperature Sensor-to-Fuel Filter Housing (Single Rail Fuel
System)—Torque.............................................................  14 N•m (10 lb-ft)
3. Install sensor wiring connector.
JOHN DEERE強鹿機型：3029DF120、3029DF128、4039DF005、4039DF008、4045TF258、6068TF158、6068TF258、6068HF158、6068HF258、6081HF001、6081AF001、6125HF070A、6125HF070B、6125HF070C、4045HF475、6068HF475、6135HF485、4045HF158、6059TF005、6068TF275、4045TF275、6059TF001、4024TF281、5030HF270、6068TF250、6135HF475、6135HF485John Deere Qianglu engine parts supply dz116559 re535944 water pump, John Deere Qianglu engine parts supply hxe11090 filter element, John Deere Qianglu engine parts supply al180458 torque damping pulley, John Deere Qianglu engine parts supply ah128449 hydraulic oil filter, John Deere Qianglu engine parts supply yc21393 wheel, John Deere Qianglu engine parts supply su39609 connecting sleeve, Bosch 0445020225 fuel injection pump, Bosch0445020225, sinotruk man 805015343 fuel injection pump, Bosch 0445110821 fuel injector, bosch0445110821 fuel injector, Weichai 0445110821, Bosch 0445110891 fuel injector, bosch0445110891 fuel injector, yangchai 0445110891, Delphi 28337917 fuel injector, Doosan excavator 400903-00074d fuel injector, Delphi 28386106 fuel injector, 28386106 fuel injector, new fuel injector,